Fully automatic waste paper packer works first by ventilation and then by electricity. When the machine stops, it first loses power and then gas. Check the vacuum, filtration and oil mist triple 24 regularly to ensure that there is oil (sewing machine oil) in the oil mist and oil cup and that there is no water in the filter cup. The heating strip and silica gel strip should be kept clean and no foreign body should be stuck to avoid affecting the sealing quality. For 2-3 months of continuous operation of the waste paper packer, 30 pairs of sliding parts of the back cover and switch bumps should be opened and lubricated, and the connecting and moving parts of the heating rod should be lubricated according to the usage. It is strictly forbidden to put your hand under the heating rod in case of injury and cut off the power supply immediately in case of emergency.
On the heating rod, the second layer of the paste under the heating sheet acts as insulation. When there is damage, it should be replaced in time to avoid a short circuit. Users have their own working gas source and inflatable gas source. The working pressure of waste paper packer has been set to 0.3MPa, which is more suitable. Don't overshoot it without special circumstances. Waste cardboard packer is not allowed to tilt and impact in the process of handling, let alone put down and carry. In order to ensure the normal operation of the vacuum pump for waste cardboard packer, the motor of the vacuum pump is not allowed to reverse.