The equipment is large and small. No matter what kind of equipment, if it is not properly maintained during the trial process and does not follow the fixed instructions, its original life will be shortened.
Therefore, in order to reduce the negative impact of human factors on stainless steel stirred tank equipment, the following points should be noted in the installation of stainless steel stirred tank equipment:
1. It should be installed on a sturdy and level workbench. The height of the workbench is determined according to the use conditions. There should be a certain space around the equipment and the workbench (≥360cm) for installation and post-maintenance.
2. The installation shaft is required to be perpendicular to the ground level, and the non-perpendicularity (inclination) shall not be greater than 1/1000 of the total height of the equipment.
3. Self-supplied spare parts and safety valves on each process of the equipment itself must be equipped according to the requirements of the reactor.
4. After the installation is completed, check whether the connecting parts and transmission parts are firm and reliable. The connection pipes, nozzles, seals and the whole machine should be tested for airtightness without any bubbles, drops, drops or leaks.
5. Before starting the machine, inject the 46# mechanical oil into the reducer, open the motor cover and turn the fan blade by hand to check whether there is any jamming phenomenon. If there is any scraping of the stirring paddle, clean the dirt in the kettle before starting the machine. Empty car running for 30 minutes without abnormal noise, vibration, before the formal production.