The rack mounting of the screw conveyor starts from the head frame, and then the intermediate frames of each part are installed in sequence to install the tailstock. According to the relevant regulations and guiding principles, the screw conveyors we produce all adopt the standard top chain as the support surface, and the motor reducer is the power transmission, supported by special guide rails.
Screw conveyors should have some basic knowledge of use before use. Scraper conveyors should be careful not to touch acids, alkalis, oils, water, and other contaminants, and keep away from heat sources during use; Avoid long-term direct sunlight, rain, and snow. The storage temperature should be maintained at -10 ° C ~ 40 ° C, the relative humidity should be maintained at 50% ~ 80%.
1. When using a screw conveyor, it is strictly forbidden to connect belts of different types and sizes.
2. Prevent folding and hard phase pressure during use.
3. The direction of the material being fed and the speed at which the material falls are consistent with the direction and speed of the belt.
4. Before use, generally, start the machine first to avoid overloading the motor and the belt slipping. Remove all material from the belt before stopping the machine.
5. The tension should not be too large during use. Under the premise that the drive roller does not slide and the material does not transition, it should work under small tension.
6. The screw conveyor should not let the belt fall off or serpentine during transportation and should be adjusted in time.
7. If it is used by sliding or pulling, it should be promptly eliminated, the tensioning system should be adjusted, and the elastic device should remain elastic.
The screw conveyor can be transported horizontally, obliquely and vertically, or it can form a generally fixed space conveyor line. The chain conveyor has a large conveying capacity, along transportation distance, and can also complete multiple processes in the transportation process, so it is widely used.