In the process of using plastic bottle balers, many companies will encounter such problems. Below we will analyze the problem of the plastic bottle baler being difficult to retreat.
First, check if there is any foreign matter in the extension of the plastic bottle baler. Check whether the screw is loose or not, which affects the normal conveying of the strap.
Be sure to strictly control the gap between the straps, usually between half a centimeter and one centimeter. Check if the bearing of the conveyor baler is broken, and the improper position of the crossbar will also cause a rare problem of retracting.
The principle of the manufacturer selecting the hydraulic pump is: according to the working condition, power size and system performance requirements of the plastic bottle baler main machine, first determine the type of hydraulic pump, and then determine the specification model according to the pressure and flow rate required by the system.
Generally, in light-load and low-power hydraulic equipment, gear pump and double-acting vane pump can be selected; high-precision mechanical equipment (small waste paper baler) can be used with double-acting vane pump and incandescent pump; On the mechanical equipment (horizontal waste paper baler) with fast and slow feed, the manufacturer can choose the variable pressure variable vane pump and the double vane pump; the equipment with large load and high power (waste paper baler) can be used. Piston pumps; auxiliary equipment for mechanical equipment, such as feeding, clamping, etc., where low-cost gear pumps are available.





