Basic Knowledge Of Screw Conveyor

May 20, 2019 Leave a message

The rack mounting of the screw conveyor starts from the head frame, and then the intermediate frames of each part are installed in sequence to install the tailstock.

Scraper conveyor should be careful not to touch acid, alkali, oil, water, and other pollutants, and keep away from the heat during use; avoid long-term direct sunlight, rain and snow weather.

1.       When using a screw conveyor, it is strictly forbidden to connect belts of different types and sizes.

2.       Prevent folding and hard phase pressure during use.

3.       The direction of the material being conveyed and the speed at which the material falls are consistent with the direction and speed of the belt.

4.       Before use, generally start the machine to avoid overloading the motor and the belt is slippery.

5.       Remove all material from the belt before stopping the machine.

6.       The tension should not be too large during use. Under the premise that the drive roller does not slide and the material does not transition, it should work under small tension.

7.       The screw conveyor should not let the belt fall off or snake shape during transportation and should be adjusted in time.

8.       If it is used by sliding or pulling, it should be promptly eliminated, the tensioning system should be adjusted, and the elastic device should remain elastic.

The screw conveyor can be transported horizontally, obliquely and vertically, or it can form a generally fixed space conveyor line. The chain conveyor has a large conveying capacity, along transportation distance, and can also complete multiple processes in the transportation process, so it is widely used.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry