What are the specific requirements for maintenance of diesel generator sets?

May 27, 2019 Leave a message

The diesel generator set is sold from the generator manufacturer to the user. When the user starts to use the diesel generator set on the first day, the maintenance work of the unit is started. The service life of the unit is closely related to the maintenance work of the unit. The high-quality diesel generator set maintenance work not only brings the extension of the unit life but also brings more economic benefits to the user. In order to better use the diesel generator set for the user, the generator manufacturer can better do the maintenance work of the diesel generator set, and share the details of the maintenance of the generator manufacturer as follows, hope to bring the gospel to the diesel generator set users.

The technical requirements for maintenance of diesel generator sets by generator manufacturers are as follows:

1.       The generator manufacturer arranges the service engineer's on-site inspection service once every six months, and the test machine runs.

2.       Each unit operates for 250 hours or 12 months (whichever comes first), and the generator manufacturer is responsible for replacing the diesel filter, oil filter, air filter, engine oil, and antifreeze antiseptic solution.

3.       Check the valve clearance every 1000 hours.

4.       Do the fuel pressure test twice a year.

5.       Perform sensor reliability testing twice a year.

6.       The pump is running normally every time the fan is checked.

7.       Each time an electronic management system is detected.

8.       Load switch reliability detection.

9.       Check the reliability of the emergency shutdown system each time.

10.   Check the control box for looseness every time you check.

11.   Check battery capacity and wiring tightness each time.

12.   Check the motor wiring for looseness every time you check.

13.   The unit is connected to the power (self-starting function) test for each inspection.

14.   Every inspection must check whether the unit exhaust is normal.

15.   Every inspection must check the unit for water leakage, air leakage, and oil leakage.

16.   Check the belt tension of each unit for each inspection.

17.   Check the charging generator and charging system for each inspection.

18.   On-site work and inspection of the crew's operating records are required for each inspection.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry