The stainless steel stirring tank is composed of a stirring tank body, a stirring tank lid, a stirrer, support, a transmission device, a shaft sealing device, etc., and a heating device or a cooling device can also be configured according to the process requirements. The mixing tank and the mixing tank cover can be flanged or welded. The mixing tank and the stirring tank lid can be used to open the feed, discharge, observation, temperature measurement, pressure measurement, steam fractionation, safe venting, and other process tube holes according to the process requirements. A transmission device (motor or reducer) is arranged on the upper part of the mixing tank cover, and the agitator in the stirring tank is driven by the transmission shaft. The shaft sealing device can be in various forms such as machine seal or packing, labyrinth seal, etc. (determined according to user needs).
1. Strictly clean and clean the liquid before storage.
2. After the liquid material is stored in the cylinder, the stirrer should be turned off intermittently.
3. After the material is discharged from the cylinder, all working surfaces and pipes that come into contact with the material, cocks, etc. must be thoroughly cleaned. The dead corners must not be covered with dirt. The cylinder should be scrubbed frequently to keep the shape bright and beautiful.
4. Do not rinse with salt water on the surface of the cylinder and the gallbladder to avoid corrosion.
5. Reducer and motor, bearings should be regularly refueled and replaced with lubricant.
This equipment uses four bolts to adjust to the horizontal line or the discharge port is lower, in order to install the inlet and outlet. When the power is connected, it should be noted that the stirring paddle should rotate clockwise and must not be reversed.