For automatic packaging machine, it can be used in many industries. And this is mostly because of its unique way so many enterprises are very like it, especially the bulk materials industry. For the bulk materials industry, they are most afraid of the quality of product safety. General packaging equipment, can not effectively ensure the quality of broken materials. For straw baling machine, its unique hydraulic packaging technology can be completely aseptic packaging.
Tape to send in place to receive strapping signal, brake release, the main motor startup - right top knife, resist right zone in skateboarding - the "T" type plate back to close to switch to retreat with the probe, main motor stalling, brake and off - > packing machine with motor rotation, back back with 0.35 seconds to belt tightening bundle on the object, main motor second start, brake and off to the big pendulum stem secondary drawstring, tighten belt - left acrosome rise.
Pressure lower band - heating piece into two straps - in the top knife, cut the ribbon to the top knife down, in the top knife to rise again, make the two straps firmly bonded to the knife down, left and right top knife fell at the same time - heating chip reset - slide back to the "T" type guide reset, close to switch to send with the probe to send belt motor start, drive belt to send to big swinging rod reset, belt strap in place, take the lead to the "T" type on the guide to proximity switch induction to double probe, the main motor stalling, brake and off - > packing machine to complete a working cycle.