The baler consists mainly of belts, belts, joints and cutting devices, drive systems, rail frames and controls.
Plastic bottle baler needs to pay attention to work during operation：
1. When we take the upper panel off, first cut off the power switch, unplug the power, then repair and adjust the machine.
2. It is forbidden to put the hand or head into the frame while the machine is running. If you insert your head or hand into the frame, the packing opportunity can cause damage to your body.
3. Should pay attention to the use of electrical components, such as repair, adjust the metal baler should pay attention to cut off the power switch, unplug the power plug, when the power is turned on, touch the electric control box, the transformer will have the risk of electric shock. In addition, damage to the external insulation and contact with the body may cause an electric shock, which is very dangerous.
4. Regarding the heater, if the heater is directly contacted by hand at a high temperature (about 230 degrees), the heater will be burned. We should cool down for a while after turning off the power before returning to normal temperature.