How does the automatic baler extend the service life

We must formulate rules and regulations for the cleaning and maintenance of the baler. Record the maintenance of the baler every time. The surface of the automatic baler should be cleaned and cleaned before use or after use. Automatic baler The belts should also be cleaned; there are also easy-to-wear parts of the automatic baler, such as blades, hot heads, etc., which need to be cleaned. Secondly, according to the use of the automatic baler, it is necessary to preheat the hot head of the baler, so as to ensure that the baler can complete the packing work when working. When using the automatic baler, the operator should always pay attention to the use of the baler. If the baler has abnormal noise or what is the problem, we must turn off the power in time to prevent accidents. When the automatic baler adjusts the hot head of the baler, do not adjust the temperature too high, which will damage the packing and bonding of our baler. After the long-term use of the automatic baler, our operators should lubricate the various components of the baler to ensure that the various components can work properly. When the workshop personnel are repairing the baler, they must record the fault of the machine every time to facilitate future enquire. When operating the baler, the shop operator must take care not to penetrate the machine into the machine while the baler is working, to prevent danger. Before the work, the operator must use compressed air to blow the inside of the machine to easily collect dust and pinned parts. Use a blade to scrape the hot adhesive residue on the hot head; clean the dirt on the hot exhaust fan.